【Home Improvement】Endeavour Fires Runswick Wall Mounted Electric Fireplace with an Off White Mantel & Plinth
-
Detail
About this item
- Wall mounted fire with an off white MDF mantel and plinth. (wall brackets supplied).
- Fireplace dimensions: W 1100mm x H 590mm x D250mm
- To meet the requirements of Eco design 2018 (Lot20), this fire is designed and manufactured to produce the optimum energy efficiency.
- The 7 days programmable remote control will turn the fire on & off and automatically switch between 1 & 2kW as the room temperature requires.
- Three flame effect options with 5 level brightness that can be enjoyed with or without the heat.
- 13 fuel bed and mood lighting options all provide a stunning display. Realistic crystals pebbles & logs included.
- MDF mantel and plinth supplied in separate pack.
- Mains cable length 1.7m (right hand side). Just plug it in and turn it on!
Product Description
Customer questions & answers
Question:Can this be used outdoors?
Answer:It isnt for outdoor use.
Question:Which part gets hot , the area where the logs are or the glass with the flames inside ?
Answer:This is essentially a fan heater, so the only heat is the air the fan blows into the room. No part of the fire gets hot , the glass is cold and the logs sit in a tray at the front of the fire. The warm air is blown from the top of the unit so the glass remains cold. Safe for pets and children hop this helps
Question:Does this come with both glass effect pebbles and logs & pebbles.
Answer:Yes. It comes with a box of logs, glass crystals and white pebbles.
Question:Hi does it have a British standard kite mark
Answer:I would think so but cannot check now as the fire is fixed on wall. Everything about it is top rate
Question:What is the recommended height from floor to hang on wall?
Answer:There is no recommended height, but you do need room to tighten fixing screws on the lower white cover, possibly 5 or 6 inches (12 to 15 cm)
Question:could this fireplace sit on a low unit instead of attached to the wall or is it not stable enough ? thanks
Answer:According to instructions, a gap of at least 200mm should be allowed between bottom of lower plinth and floor, but this is only to get to the plinth fixing screws when it is on the wall. If you fix the plinth first, it could be self standing. The air goes into the heater at the top so this wouldn't be a problem but you wouldn't be able to get to the cable storage compartment. The manufacturer's instructions specify a 200mm gap beneath the fire, so not adhering to this is your decision.
Question:It looks white from the pictures and looking for white. Anybody able to advise on the off white colour ie is it magnolia or is it nearly white?
Answer:Very slightly off white. I wanted white but am not disappointed.
-
Customer ReviewsO***.
It's outstanding beyond measurably doubt
A***EALove this fire. Needs a bit of time to put together but really worth it.
J***sThis looked very good once mounted on the wall. The remote control does everything with the click of a button. 3x main fire colour settings with different brightness's. 13 or 14 for the fire bed colours also you can change the brightness. Option of Stones, Pebbles, Crystals, Logs or all of them, it's up to you. Mood lighting below is the same as fire bed loads of colours. It also has a timer and thermostat so it can turn on or click off at the temp you set. My mother in Law also got me to order her one as she loved ours. Only issue I had was the bottom plinth not fitting snug to the wall and my Mother in Laws was the same. I just drilled 2 holes and fits no issue otherwise the stones fall down inside it. (Minor thing) Overall I would recommend it to anyone. It' looks better in the flesh.
Mc****ldWas going to fit a second radiator in the front room but was talked into an electric fireplace. As it would look better and make the room more cozy. Researched a lot of options on the market, mainly budget ones. Read tons of reviews on this one. Not disappointed in my decision. Easy to install. Looks fantastic, easy to operate and provides the extra heat needed in the winter. More colour options in 3 different places than I care to use but it's nice to have. Phoned the manufacturer to check fitting first and I didn't want to drill through where my TV cables are already located. They were very helpful and emailed me the install guide before I decided to purchase. For installation it does require a screw central to the unit, which I could not do due to forementioned TV cables so just missed that one screw out. Does make noise when the heat setting is on but is about as quiet as you could expect from a fan assisted heater in my opinion.
L**nAbsolutely love this fire it has made a huge difference to the look of my living room - so much more modern & stylish without having a big fireplace in there now. It’s so easy to use with the remote control, has several different light affects for the front and underneath the fire - lots of different colours. The flame affect has 3 settings which are blue, warm orange or you can have the two mixed together. Different heat settings ie timer/ temp/manual etc - It heats up the room really quickly so don’t need it on for long, but you can still keep the flame affect on without the heat being on , so the room still feels cosy. The heat comes from underneath the top plinth too and not directly up from the top of the fire , so I was able to mount my tv above it. So happy with it and I get complimented on it all the time
M***neThis fire is a beauty, the flame effect is fabulous the heat when in is warm and not too noisy, the flames, fuel bed and down lights can all be changed to different colours too, I’ve had this fire a few months now and I am over the moon with it, hope this review helps x
c**hThe fire as a whole is lovely, looks great on the wall and the flame affects are really pretty
M***JWAmazing fireplace, we’re delighted with this purchase, would highly recommended purchasing it.
Do*****55So easy to install and everything supplied. Beautiful fire really happy with my purchase.